|
Characteristics：
MHJ-900S ultrasonic shearing machine has the characteristics of compact structure, simple operation and no need to change the mold: it has three cutting modes: ultrasonic cutting, cold cutting and hot cutting
Function: it can be single cut, folded in the middle, folded on both sides and folded long and short, and has the function of typesetting.
Advantages :
1. It has three cutting functions: ultrasonic cutting, cold cutting and hot cutting;
2. Each function has three kinds of folding methods: single cut, centre-fold, and end-fold. In these methods, there is no need to change the mold, and it has the function of discharging waste, especially no need to replace the mold function, providing practically and convenience for customers, this function is deeply loved by customers.
3.The machine adopts automatic frequency tracking 30K ultrasonic wave. In the work of the equipment, it can automatically adjust the frequency and use the instantaneous high temperature to cut. The welding firmness of cutting is 20%-30% higher than the traditional 20K ultrasonic wave.
4. The stepping motor is used to drive the rear feeding roller to keep pace with the front feeding roller. Compared with the traditional motor feeding device, the material rolling phenomenon can be well avoided;
5. When the machine is in the work, if the material is not inclined or the finishing is not in place, it can be finely adjusted without disassembling the pulling claws, so that the trademark folds more neatly.
Main Technical Variables:
|
Model
|
MHJ-900S
|
|
Cut off the way
|
Ultrasound, cold cutting, hot cutting
|
|
Shearing and Folding Types
|
Cut Info Slices，End Fold，Center Fold，Length Fold
|
|
Cutting Length
|
15-165mm
|
|
Cutting Width
|
10-50mm
|
|
Cutting speed(pcs/min，50Length)
|
200
|
|
The power supply
|
AC:220V ,50Hz(60Hz)，2.5KW
|
|
Overall dimensions (mm)
|
1500(L)x1200(W)x1500(H)mm
|
|
Weight （kg）
|
375kg
|
|
